NCV887103D1R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCV887103 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Max Output Current | 100μA |
| Input Voltage-Nom | 13.2V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 575mA |
| Voltage - Supply (Vcc/Vdd) | 3.2V~40V |
| Control Features | Current Limit, Enable |
| Max Output Voltage | 2.5V |
| Topology | Boost, Flyback |
| Min Input Voltage | 3.2V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 340kHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 300mV |
| Max Frequency | 374kHz |
| Duty Cycle (Max) | 93% |
| Clock Sync | Yes |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV887103D1R2G Overview
This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. dc motor controller is suitable for 1 output generation. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. DC control operates at 3.2V~40V volts and has 3.2V~40V supply voltage. Qualified to work in a -40°C~150°C TJ dc switcher. Switching can be done at 340kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. Current Limit, Enable provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. DUAL are the position of the terminal of the switching converters. 8 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 13.2V nominal DC switcher's voltage input. Search for "NCV887103" to find other relevant dc to dc converter ics. There are 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. normally, the dc dc regulator's output current is 575mA, which you should keep in mind when starting a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator's maximum frequency is 374kHz. The dc switcher's maximum input voltage is 40V, so users must limit the voltage accordingly. 3.2V is the required supply voltage. DC switcher will not be able to provide an output current above 100μA volts. As per its datasheet, the switching converter has a maximum output of 2.5V volts. The voltage controller's lowest voltage output is not less than 300mV.
NCV887103D1R2G Features
Transistor Driver Outputs
Switching Frequency: 340kHz
Current Limit, Enable
PULSE WIDTH MODULATION
NCV887103D1R2G Applications
There are a lot of ON Semiconductor NCV887103D1R2G DC to DC converter applications.
- Photovoltaic power
- Communication system
- Product burn-in
- Automation technology
- Shearing machines
- Computer application technology
- seismic instrument power circuits
- Energy management systems
- PSRR circuits
- Injection molding machinery
