Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-VFDFN Exposed Pad |
Number of Pins |
10 |
Weight |
50.008559mg |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2015 |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Terminal Pitch |
0.5mm |
Function |
Step-Down |
Number of Outputs |
2 |
Output Voltage |
3.3V |
Output Type |
Adjustable |
Max Output Current |
1.6A |
Operating Supply Voltage |
5.5V |
Voltage - Input (Min) |
2.7V |
Analog IC - Other Type |
DUAL SWITCHING CONTROLLER |
Output Configuration |
Positive |
Max Output Voltage |
3.3V |
Voltage - Output (Min/Fixed) |
0.9V |
Topology |
Buck |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
2.1MHz |
Synchronous Rectifier |
Yes |
Min Output Voltage |
900mV |
Voltage - Output (Max) |
3.3V |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NCV896530MWTXG Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. There are 10 terminations in this voltage regulator. There are two types of analog ICs in this voltage regulator 12v: DUAL SWITCHING CONTROLLER ICs, which are the ones used in older voltage regulator 12vs. This harley voltage regulator is available in the 10-VFDFN Exposed Pad package for the purpose of space saving. The voltage regulator is configured with 2 outputs. DC DC switching regulators like this one generate Adjustable outputs on their output pins to handle the power management. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. During switching regulator operation, the operating temperature should remain at -40°C~150°C TJ. This voltage regulator 12v reaches a switching frequency of 2.1MHz. A dc to dc voltage regulator's minimum input voltage of 2.7V is required for this voltage regulator to operate. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.9V. Listed under the subcategory of Switching Regulator or Controllers is this voltage regulator 12v. There is a possibility that DC DC switching regulator can give voltage at 3.3V volts. The switching regulator operation is carried out by 10 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 900mV. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 1.6A A. The maximal output voltage of 3.3V allows DC DC switching regulator to be operated easily. An output voltage of 3.3V is provided by this regulator voltage. The switching DC-DC regulator belongs to the Automotive, AEC-Q100 family of electronic voltage regulator 12vs. 5.5V is the supply voltage for this DC-DC switching regulator.
NCV896530MWTXG Features
2 outputs
10 pins
Operating supply voltage of 5.5V
NCV896530MWTXG Applications
There are a lot of ON Semiconductor NCV896530MWTXG Voltage Regulators applications.
- Die casting equipment
- Mobile phones
- Hydro power
- Communication system
- Low output voltage switching power supply circuits
- Smoke prevention equipment
- Flaw detection equipment
- Telecommunications equipment
- Smoke exhaust equipment
- Window air conditioners