NE5517ANG
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Max Power Dissipation | 1.5W |
| Technology | BIPOLAR |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NE5517 |
| Pin Count | 16 |
| Output Type | Push-Pull |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 2.6mA |
| Power Dissipation | 1.5W |
| Output Current | 350A |
| Supply Current-Max | 4mA |
| Slew Rate | 50V/μs |
| Amplifier Type | Transconductance |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 400nA |
| Max Input Voltage | -3V |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 650μA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Average Bias Current-Max (IIB) | 7μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Bias Current-Max (IIB) @25C | 5μA |
| Nominal Gain Bandwidth Product | 2MHz |
| Height | 6.35mm |
| Length | 19.55mm |
| Width | 6.85mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NE5517ANG Overview
In the package, you will find a 16-DIP (0.300, 7.62mm)-case to contain the op amp ic. Transconductance-type instrumentation amplifiers are used in this application. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 16. There are a total of 16 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 16 pins. Regarding input offset voltage, op amp rates 2mV. This electrical part should be mounted using type Through Hole. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureYou can run this op amp ic on 2.6mA . A instrumentation amplifier like this has 2 circuits. One of its many advantages is that buffer op amp outputs Push-Pull signals. Op amp has total of 2 elements. RAIL is adopted to pack the instrumentation amplifier.
NE5517ANG Features
16 Pins
supply voltage of 15V
Output Type: Push-Pull
NE5517ANG Applications
There are a lot of ON Semiconductor NE5517ANG Instrumentational OP Amps applications.
- Weak signal detection
- Radiation thermometry transducers
- Biopotential
- Division circuits
- Navigation
- Communication
- Proportional operation circuits
- Instrumentation
- Digital cameras
- earphone
