NE5517D
| Parameters | |
|---|---|
| Max Input Voltage | -3V |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 650μA |
| Input Offset Voltage (Vos) | 400μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Average Bias Current-Max (IIB) | 8μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Bias Current-Max (IIB) @25C | 5μA |
| Nominal Gain Bandwidth Product | 2MHz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifiers |
| Packing Method | RAIL |
| Max Power Dissipation | 1.125W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NE5517 |
| Pin Count | 16 |
| Output Type | Push-Pull |
| Power Supplies | +-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 2.6mA |
| Nominal Supply Current | 4mA |
| Slew Rate | 50V/μs |
| Amplifier Type | Transconductance |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 400nA |
NE5517D Overview
There is a 16-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Op amps are Transconductance types of amplifier on the chip. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 16. A total of 16 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifiers device. The buffer op amp includes 16 pins. With regard to input offset voltage, instrumentation amplifier is rated at 400μV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. Using a supply current of 2.6mA , this buffer op amp will be able to operate. On this buffer amplifier, there are 2 circuits. In addition to outputting Push-Pull signals, this op amp ic offers a number of other advantages. A RAIL-shaped amplifier is used to pack the buffer amps.
NE5517D Features
16 Pins
supply voltage of 15V
Output Type: Push-Pull
NE5517D Applications
There are a lot of ON Semiconductor NE5517D Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Multiplication circuits
- Voltage regulation circuit
- Gaming industry
- Proportional operation circuits
- Test equipment
- Displayers for aircraft and air transportation control systems
- Semiconductor detectors
- Vehicle electronics
- Professional videography
