NE5532AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | NE5532 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Power Supplies | +-5/+-15/10/30V |
| Number of Channels | 2 |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 16mA |
| Output Current | 38mA |
| Slew Rate | 9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 4mV |
| Power | YES |
| Input Offset Current-Max (IIO) | 0.15μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NE5532AD Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. In the case of Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 8 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 4mV. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. You can run this op amp ic on 8mA . It is recommended to keep the voltage gain at 100dB at all times. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 15V.
NE5532AD Features
8 Pins
supply voltage of 15V
100dB voltage gain
NE5532AD Applications
There are a lot of Texas Instruments NE5532AD Instrumentational OP Amps applications.
- Subtraction operation circuits
- Automotive sensors
- Power generator
- Broadcasting
- Signal transformation
- Portable docking station
- E-book readers
- Television broadcasting equipment
- Digital cameras
- Multiplication circuits
