banner_page

NE5532APSRE4

38mA per Channel 200nA 70 dB Instrumentational OP Amps 15V ±5V~15V NE5532 8 Pins 8-SOIC (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-NE5532APSRE4
  • Package: 8-SOIC (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 270
  • Description: 38mA per Channel 200nA 70 dB Instrumentational OP Amps 15V ±5V~15V NE5532 8 Pins 8-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.209, 5.30mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Base Part Number NE5532
Pin Count 8
Operating Supply Voltage 15V
Power Supplies +-5/+-15/10/30V
Number of Circuits 2
Operating Supply Current 8mA
Nominal Supply Current 16mA
Output Current 38mA
Slew Rate 9V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 70 dB
Current - Input Bias 200nA
Voltage - Supply, Single/Dual (±) ±5V~15V
Output Current per Channel 38mA
Input Offset Voltage (Vos) 500μV
Bandwidth 10MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 10000 kHz
Voltage Gain 100dB
Low-Offset NO
Frequency Compensation YES
Low-Bias NO
Micropower NO
Programmable Power NO
Nominal Gain Bandwidth Product 10MHz
Max I/O Voltage 4mV
Power YES
Input Offset Current-Max (IIO) 0.15μA
Height 2mm
Length 6.2mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NE5532APSRE4 Overview


In order to protect the op amps, a 8-SOIC (0.209, 5.30mm Width) case is used. Op amps are General Purpose types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 15V. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 8mA and 10 . There should be no change in the voltage gain at 100dB. The buffer amp consists of 2 circuits in total. The operating supply voltage of instrumentation amplifier is rated 15V voltage. This linear amplifier pack is based on the TR axis.

NE5532APSRE4 Features


8 Pins
supply voltage of 15V
100dB voltage gain

NE5532APSRE4 Applications


There are a lot of Texas Instruments NE5532APSRE4 Instrumentational OP Amps applications.

  • Proportional operation circuits
  • Tablets
  • Computer workstations
  • Communication
  • Power control
  • Portable docking station
  • Voltage regulation circuit
  • Broadcasting
  • Logarithmic operation circuits
  • E-book readers

Write a review

Note: HTML is not translated!
    Bad           Good