NE5532D8G
| Parameters | |
|---|---|
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | ±3V~20V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 1μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Nominal Gain Bandwidth Product | 10MHz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifiers |
| Packing Method | RAIL |
| Max Power Dissipation | 780mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NE5532 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 780mW |
| Output Current | 38mA |
| Slew Rate | 9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
NE5532D8G Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. A Tube case is used for delivering the op amp. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 15V battery. A type of Operational Amplifiers buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 4mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 8mA . It is a member of the 100dB's 100dB family. The total number of elements in this buffer amplifier is 2. For the packing of the instrumentation amplifier, RAIL is adopted.
NE5532D8G Features
8 Pins
supply voltage of 15V
100dB voltage gain
NE5532D8G Applications
There are a lot of ON Semiconductor NE5532D8G Instrumentational OP Amps applications.
- Medical imaging
- Addition operation circuits
- Fission chambers
- Portable docking station
- Power transmission
- Gaming industry
- Industrial applications including automation
- RF cable systems
- Automation control systems
- Multiplication circuits
