NE5532D8R2
| Parameters | |
|---|---|
| Nominal Supply Current | 8mA |
| Power Dissipation | 780mW |
| Output Current | 38mA |
| Slew Rate | 9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | ±3V~20V |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 1μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Nominal Gain Bandwidth Product | 10MHz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | OBSOLETE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NE5532 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 8mA |
NE5532D8R2 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifiers device, to be precise. Linear amplifier includes 8 pins. Op amp ic rates 4mV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. This op amp can operate from a supply current at 8mA. There should be no change in the voltage gain at 100dB. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 20V. The instrumentation amplifier is packed in the form of TAPE AND REEL.
NE5532D8R2 Features
8 Pins
supply voltage of 15V
100dB voltage gain
NE5532D8R2 Applications
There are a lot of ON Semiconductor NE5532D8R2 Instrumentational OP Amps applications.
- Radar
- Comparator
- Industrial control system
- High-frequency data acquisition systems
- Medical imaging
- Hand-held batteries
- Communication device
- Navigation
- Multiplication circuits
- Weighing systems
