NE5532DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NE5532 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 1.2W |
| Output Current | 38mA |
| Slew Rate | 9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | ±3V~20V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 1μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Bias Current-Max (IIB) @25C | 0.8μA |
| Nominal Gain Bandwidth Product | 10MHz |
| Height | 2.45mm |
| Length | 10.45mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NE5532DG Overview
In the package, you will find a 16-SOIC (0.295, 7.50mm Width)-case to contain the op amp ic. An op amp ic of the General Purpose type. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 16 terminations this year. The total number of pins on linear amplifier is 16. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 16 pins on it. In terms of input offset voltage, operational amplifier rates 4mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. Operational amplifier can operate supply current at 8mA. It is recommended to keep the voltage gain at 100dB at all times. The op amp ic has 2 channels on it. The operating supply voltage of instrumentation amplifier is rated 20V voltage. This linear amplifier pack is based on the RAIL axis.
NE5532DG Features
16 Pins
supply voltage of 15V
100dB voltage gain
NE5532DG Applications
There are a lot of ON Semiconductor NE5532DG Instrumentational OP Amps applications.
- Tablets
- ECG equipment
- Exponential operation circuits
- Vehicle electronics
- Blood pressure sensors
- Industrial applications including automation
- Differentiator circuits
- Digital cameras
- Medical instruments
- Cinema or auditorium audio system
