Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
Contact Plating | Gold |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154, 3.90mm Width) |
Surface Mount | YES |
Number of Pins | 8 |
Operating Temperature | 0°C~70°C |
Packaging | Cut Tape (CT) |
JESD-609 Code | e3 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Terminal Finish | Matte Tin (Sn) |
Subcategory | Operational Amplifier |
Packing Method | TR |
Technology | BIPOLAR |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 2 |
Supply Voltage | 15V |
Base Part Number | NE5532 |
Pin Count | 8 |
Power Supplies | +-5/+-15/10/30V |
Number of Channels | 2 |
Operating Supply Current | 8mA |
Nominal Supply Current | 16mA |
Output Current | 38mA |
Slew Rate | 9V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 70 dB |
Current - Input Bias | 200nA |
Voltage - Supply, Single/Dual (±) | ±5V~15V |
Output Current per Channel | 38mA |
Input Offset Voltage (Vos) | 4mV |
Bandwidth | 10MHz |
Neg Supply Voltage-Nom (Vsup) | -15V |
Unity Gain BW-Nom | 10000 kHz |
Voltage Gain | 100dB |
Low-Offset | NO |
Frequency Compensation | YES |
Voltage - Input Offset | 500μV |
Low-Bias | NO |
Micropower | NO |
Programmable Power | NO |
Dual Supply Voltage | 9V |
Nominal Gain Bandwidth Product | 10MHz |
Max I/O Voltage | 4mV |
Power | YES |
Input Offset Current-Max (IIO) | 0.15μA |
Height | 1.75mm |
Length | 4.9mm |
Width | 3.91mm |
Thickness | 1.58mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. Op amp ic rates 4mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 8mA and 10 . Voltage gain should remain at 100dB. On the buffer amps, there are 2 channels that can be used. As a result of this, the buffer amplifier is packed in TR.
8 Pins
supply voltage of 15V
100dB voltage gain
There are a lot of Texas Instruments NE5532DR Instrumentational OP Amps applications.
Tablets
Test equipment
Portable electronic products powered by batteries
Radar
Radiation thermometry transducers
Proportional operation circuits
Test and measurement instruments
single/dual op amp sum and difference circuits
Subtraction operation circuits
High/low-pass filter circuit