banner_page

NE5532N

2 Channels 38mA per Channel 200nA 70 dB Instrumentational OP Amps 1μA 20V ±3V~20V NE5532 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NE5532N
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 745
  • Description: 2 Channels 38mA per Channel 200nA 70 dB Instrumentational OP Amps 1μA 20V ±3V~20V NE5532 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Lifecycle Status OBSOLETE (Last Updated: 2 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 2006
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Operational Amplifier
Packing Method RAIL
Technology BIPOLAR
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 2
Supply Voltage 15V
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number NE5532
Pin Count 8
Qualification Status Not Qualified
Operating Supply Voltage 20V
Power Supplies +-15V
Number of Channels 2
Operating Supply Current 8mA
Nominal Supply Current 16mA
Power Dissipation 1.1W
Output Current 38mA
Slew Rate 9V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 70 dB
Current - Input Bias 200nA
Voltage - Supply, Single/Dual (±) ±3V~20V
Output Current per Channel 38mA
Input Offset Voltage (Vos) 4mV
Bandwidth 10MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 10000 kHz
Voltage Gain 100dB
Average Bias Current-Max (IIB) 1μA
Power Supply Rejection Ratio (PSRR) 80dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 500μV
Height Seated (Max) 4.45mm
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Lead Free
NE5532N Description

The NE5532N is a dual high-performance low noise operational amplifier. Compared to most of the standard operational amplifiers, such as the 1458, it shows better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths.
This makes the NE5532N especially suitable for application in high-quality and professional audio equipment, instrumentation and control circuits, and telephone channel amplifiers. The op amp is internally compensated for gains equal to one. If very low noise is of prime importance, it is recommended that the 5532A version be used because it has guaranteed noise voltage specifications.
NE5532N Features

● Small-Signal Bandwidth: 10 MHz
● Output Drive Capability: 600 Ω, 10 VRMS
● DC Voltage Gain: 50000
● AC Voltage Gain: 2200 at 10 kHz
● Power Bandwidth: 140 kHz
● Slew Rate: 9.0 V/us
● Compensated for Unity Gain
● Pb?Free Packages are Available
NE5532N Applications

● 5G Communication
● Electrification of automobile
● Industrial 4.0
● Voltage follower
● Selective inversion circuit
● Current-to-voltage converter
● Active rectifier
● Integrator
● Whole wide variety of filters
● Voltage comparator

Write a review

Note: HTML is not translated!
    Bad           Good