banner_page

NE5534AP

1 Channels 38mA per Channel 500nA 70 dB Instrumentational OP Amps 15V 10V~30V ±5V~15V NE5534 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-NE5534AP
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 504
  • Description: 1 Channels 38mA per Channel 500nA 70 dB Instrumentational OP Amps 15V 10V~30V ±5V~15V NE5534 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Number of Functions 1
Supply Voltage 15V
Terminal Pitch 2.54mm
Base Part Number NE5534
Pin Count 8
Operating Supply Voltage 15V
Number of Channels 1
Operating Supply Current 4mA
Nominal Supply Current 4mA
Output Current 38mA
Slew Rate 13V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 70 dB
Current - Input Bias 500nA
Voltage - Supply, Single/Dual (±) 10V~30V ±5V~15V
Output Current per Channel 38mA
Input Offset Voltage (Vos) 4mV
Bandwidth 10MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 10000 kHz
Voltage Gain 100dB
Low-Offset NO
Frequency Compensation YES AVCL>=3
Supply Voltage Limit-Max 22V
Voltage - Input Offset 500μV
Low-Bias NO
Micropower NO
Programmable Power NO
Dual Supply Voltage 9V
Nominal Gain Bandwidth Product 10MHz
Max I/O Voltage 4mV
Power YES
Input Offset Current-Max (IIO) 0.3μA
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NE5534AP Overview


Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 15V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 4mV. This electronic part is recommended for mounting type Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. Using a supply current of 4mA , this buffer op amp will be able to operate. Keeping the voltage gain at 100dB is the best course of action. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 15V voltage.

NE5534AP Features


8 Pins
supply voltage of 15V
100dB voltage gain

NE5534AP Applications


There are a lot of Texas Instruments NE5534AP Instrumentational OP Amps applications.

  • Laptop
  • Mobile phone
  • Computer workstations
  • Division circuits
  • Television broadcasting equipment
  • Measurements of Wheatstone bridge
  • Radiation thermometry transducers
  • Differentiator circuits
  • Industrial control system
  • High input resistance broadband

Write a review

Note: HTML is not translated!
    Bad           Good