banner_page

NE5534DRE4

38mA per Channel 500nA 70 dB Instrumentational OP Amps 15V 10V~30V ±5V~15V NE5534 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-NE5534DRE4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 987
  • Description: 38mA per Channel 500nA 70 dB Instrumentational OP Amps 15V 10V~30V ±5V~15V NE5534 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Base Part Number NE5534
Pin Count 8
Operating Supply Voltage 15V
Number of Elements 1
Operating Supply Current 4mA
Nominal Supply Current 4mA
Output Current 38mA
Slew Rate 13V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 70 dB
Current - Input Bias 500nA
Voltage - Supply, Single/Dual (±) 10V~30V ±5V~15V
Output Current per Channel 38mA
Input Offset Voltage (Vos) 4mV
Bandwidth 10MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 10000 kHz
Voltage Gain 100dB
Low-Offset NO
Frequency Compensation YES AVCL>=3
Supply Voltage Limit-Max 22V
Voltage - Input Offset 500μV
Low-Bias NO
Micropower NO
Programmable Power NO
Nominal Gain Bandwidth Product 10MHz
Max I/O Voltage 4mV
Power YES
Input Offset Current-Max (IIO) 0.3μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm

NE5534DRE4 Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. For this electronic part, it is recommended that you mount it with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . You can run this op amp ic on 4mA . 100dB should remain the voltage gain. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V. This linear amplifier pack is based on the TR axis.

NE5534DRE4 Features


8 Pins
supply voltage of 15V
100dB voltage gain

NE5534DRE4 Applications


There are a lot of Texas Instruments NE5534DRE4 Instrumentational OP Amps applications.

  • Medical imaging
  • Laptop
  • High/low-pass filter circuit
  • Television
  • High input resistance broadband
  • Large motor controllers
  • Addition operation circuits
  • Precision measurement
  • Multiplication circuits
  • Mobile phone

Write a review

Note: HTML is not translated!
    Bad           Good