NE5534PE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | COMMERCIAL |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 4mA |
| Current - Output | 38mA |
| Slew Rate | 13 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1.5μA |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=3 |
| Max Dual Supply Voltage | 15V |
| Low-Bias | NO |
| Micropower | NO |
| Min Dual Supply Voltage | 5V |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 4mV |
| Power | YES |
| Input Offset Current-Max (IIO) | 0.3μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NE5534PE4 Overview
It is packaged in an PDIP-case that protects the operational amplifiers from damage. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. Linear amplifier is delivered in a Rail/Tube case. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. Using a supply current of 4mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 100dB. This op amp needs to be operated at a temperature of not less than 0°C degrees Celsius in order to function properly. Linear amplifier shouldn't be used above 70°C degrees. A voltage rating of 1 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 15V voltage. It is recommended that you conduct this electronic part using the dual supply voltage of 15V.
NE5534PE4 Features
8 Pins
supply voltage of 15V
100dB voltage gain
NE5534PE4 Applications
There are a lot of Texas Instruments NE5534PE4 Instrumentational OP Amps applications.
- Polarized electrodes
- High gain DC amplifier
- Computer workstations
- High-frequency data acquisition systems
- Signal transformation
- Blood pressure sensors
- E-book readers
- Vehicle electronics
- Addition operation circuits
- Laptop
