NID5003NT4G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | HDPlus™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 42mOhm |
| Voltage - Rated DC | 42V |
| Max Power Dissipation | 2.3W |
| Current Rating | 20A |
| Base Part Number | NID5003N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 20A |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Power Dissipation | 2.3W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 42V |
| Continuous Drain Current (ID) | 20A |
| Threshold Voltage | 1.7V |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 14V |
| Voltage - Load | 42V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Dual Supply Voltage | 42V |
| Rds On (Typ) | 42m Ω |
| Drain to Source Resistance | 42mOhm |
| Nominal Vgs | 1.7 V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NID5003NT4G Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The TO-252-3, DPak (2 Leads + Tab), SC-63 package contains it.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -55°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.A voltage of Not Required is used to power it.It has a maximum output voltage of N-Channel volts.Features of the lighting driver are Auto Restart, Slew Rate Controlled.This object belongs to the NID5003N family.The 3 pins are used to operate the LED driver.The maximum output current must drop to 20A to meet the operation criteria.It is mounted in the way of Surface Mount.3 pins are equipped with it.In this LED driving board, there is 42mOhm resistance.It is included in the HDPlus? series.
NID5003NT4G Features
Resistance of 42mOhm
NID5003NT4G Applications
There are a lot of ON Semiconductor NID5003NT4G Power Switches ICs applications.
- Hard Disk Drives
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Portable GPS
- Notebook and Tablet Computers
- Notebook PC
- Storage (HDDs, SSDs)
- Wearable Devices
- Smart Phones, Feature Phones
- USB Power Distribution
