NID5004NT4G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 22 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | HDPlus™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.3W |
| Base Part Number | NID5004N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6.5A |
| Operating Supply Voltage | 40V |
| Interface | On/Off |
| Nominal Supply Current | 200μA |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 6.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 115 ns |
| Switch Type | Relay, Solenoid Driver |
| Clamping Voltage | 44V |
| Rise Time | 282ns |
| Drain to Source Voltage (Vdss) | 40V |
| Fall Time (Typ) | 690 ns |
| Turn-Off Delay Time | 1.02 μs |
| Continuous Drain Current (ID) | 6.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Dual Supply Voltage | 40V |
| Rds On (Typ) | 110m Ω |
| Drain to Source Resistance | 110mOhm |
| Nominal Vgs | 1.85 V |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NID5004NT4G Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the TO-252-3, DPak (2 Leads + Tab), SC-63 package.This lighting drivere has a mounting type of Surface Mount.Relay, Solenoid Driver is the type of switch owned by it.Ensure reliable operation by setting the temperature to -55°C~150°C TJ.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Auto Restart, Slew Rate Controlled.It belongs to the family NID5004N.The 3 pins are used for the operation of the system.The maximum output current must drop to 6.5A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.As a result, it has a total of 3 pins.It belongs to the HDPlus? series.As a result, the output current is set to 6.5A.For maximum efficiency, the supply voltage should be set to 40V.
NID5004NT4G Features
NID5004NT4G Applications
There are a lot of ON Semiconductor NID5004NT4G Power Switches ICs applications.
- Hot Swap
- Portable Video Game Players
- Portable GPS
- Notebook and Tablet Computers
- Hot Swap
- Portable Music Players
- Low Voltage I/O System Power
- Portable Devices
- Smart Phones, Feature Phones
- Handheld Devices
