NID6002NT4
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | HDPlus™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Rated DC | 65V |
| Reach Compliance Code | not_compliant |
| Current Rating | 6.5A |
| Base Part Number | NID6002N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6.5A |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 250ns |
| Fall Time (Typ) | 660 ns |
| Turn-Off Delay Time | 840 ns |
| Continuous Drain Current (ID) | 6.5A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 14V |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Rds On (Typ) | 185m Ω |
| Drain to Source Resistance | 210mOhm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NID6002NT4 Overview
It is package in Tape & Reel (TR) case.This package is included in TO-252-3, DPak (2 Leads + Tab), SC-63.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.To ensure reliable operation, the temperature should be set to -55°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Auto Restart, Slew Rate Controlled features are available on the lighting driver.As you can see, it comes from the NID6002N family.In order to operate, 3 pins are used.Maximum output current falls to 6.5A when operation criteria are met.As a result, it has a total of 3 pins.This electrical component is part of the HDPlus? series.
NID6002NT4 Features
NID6002NT4 Applications
There are a lot of ON Semiconductor NID6002NT4 Power Switches ICs applications.
- Wireless/Networking Cards
- Hard Disk Drives
- Storage (HDDs, SSDs)
- Hot Swap
- USB Power Distribution
- Hot Swaps
- USB Ports/Hubs
- USB3.1 Power Delivery
- Smart Phones, Feature Phones
- Portable GPS
