banner_page

NID9N05ACLT4G

N-Channel PMIC Automotive, AEC-Q101 Series 3 Pin TO-252-3, DPak (2 Leads + Tab), SC-63


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NID9N05ACLT4G
  • Package: TO-252-3, DPak (2 Leads + Tab), SC-63
  • Datasheet: PDF
  • Stock: 869
  • Description: N-Channel PMIC Automotive, AEC-Q101 Series 3 Pin TO-252-3, DPak (2 Leads + Tab), SC-63 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Surface Mount YES
Number of Pins 3
Transistor Element Material SILICON
Operating Temperature -55°C~175°C TJ
Packaging Tape & Reel (TR)
Published 2006
Series Automotive, AEC-Q101
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 2
ECCN Code EAR99
Terminal Finish Tin (Sn)
Additional Feature LOGIC LEVEL COMPATIBLE
Subcategory FET General Purpose Power
Max Power Dissipation 1.74W
Terminal Form GULL WING
Pin Count 3
JESD-30 Code R-PSSO-G2
Number of Outputs 1
Output Type N-Channel
Number of Elements 1
Interface On/Off
Element Configuration Single
Output Configuration Low Side
Operating Mode ENHANCEMENT MODE
Power Dissipation 1.74W
Voltage - Supply (Vcc/Vdd) Not Required
Case Connection DRAIN
Input Type Non-Inverting
Turn On Delay Time 200 ns
Switch Type Relay, Solenoid Driver
Transistor Application SWITCHING
Halogen Free Halogen Free
Drain to Source Voltage (Vdss) 55V
Turn-Off Delay Time 2.5 μs
Continuous Drain Current (ID) 9A
Threshold Voltage 1.75V
Ratio - Input:Output 1:1
Gate to Source Voltage (Vgs) 15V
Voltage - Load 52V Max
Drain Current-Max (Abs) (ID) 9A
Fault Protection Over Voltage
Drain to Source Breakdown Voltage 59V
Input Capacitance 250pF
FET Technology METAL-OXIDE SEMICONDUCTOR
Rds On (Typ) 90m Ω
Drain to Source Resistance 90mOhm
Rds On Max 90 mΩ
Nominal Vgs 1.75 V
Height 2.38mm
Length 6.22mm
Width 6.73mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NID9N05ACLT4G Overview


A Tape & Reel (TR) is used to package it.The TO-252-3, DPak (2 Leads + Tab), SC-63 package includes it.The mounting type of the LED driver is Surface Mount.A Relay, Solenoid Driver switch type is owned by it.To ensure reliable performance, the temperature should be set to -55°C~175°C TJ.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It contains 2 terminations.The operation is performed through the 3 pins.3 pins are equipped with it.This electrical component can be found in the Automotive, AEC-Q101 series.A self-contained LED driver with a capacity of FET General Purpose Power is contained in an econtainer.This LED driver can also produce LOGIC LEVEL COMPATIBLE.Total, there are 1 elements.To name a few, the lighting driver has SWITCHING transistor application.

NID9N05ACLT4G Features


Additional features like LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING

NID9N05ACLT4G Applications


There are a lot of ON Semiconductor NID9N05ACLT4G Power Switches ICs applications.

  • USB Protection
  • USB Power Distribution
  • HDD, SSD
  • Wireless Headsets
  • Smart Phones, Feature Phones
  • PDAs
  • Notebook PC
  • Wireless/Networking Cards
  • Set-top-box
  • Various applications equipped with buttons

Write a review

Note: HTML is not translated!
    Bad           Good