NID9N05CLG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Transistor Element Material | SILICON |
| Operating Temperature | -55°C~175°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | Automotive, AEC-Q101 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ESD PROTECTED |
| Subcategory | FET General Purpose Power |
| Voltage - Rated DC | 52V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Current Rating | 8A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NID9N05CL |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 1.74W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Transistor Application | SWITCHING |
| Rise Time | 500ns |
| Fall Time (Typ) | 1.8 μs |
| Turn-Off Delay Time | 2.5 μs |
| Continuous Drain Current (ID) | 9A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 15V |
| Voltage - Load | 52V Max |
| Drain Current-Max (Abs) (ID) | 9A |
| Fault Protection | Over Voltage |
| Drain to Source Breakdown Voltage | 52V |
| Input Capacitance | 250pF |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 90m Ω |
| Drain to Source Resistance | 90mOhm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NID9N05CLG Overview
The LED driver's packaged as a Tube.The TO-252-3, DPak (2 Leads + Tab), SC-63 package contains it.Mounting type Surface Mount is selected for the LED driving board.It owns the Relay, Solenoid Driver switch type.It is recommended that the temperature be set to -55°C~175°C TJ for reliable performance.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.The maximum output voltage is N-Channel volts.It is a member of the NID9N05CL family.It contains 2 terminations.The 3 pins are used to operate the LED driver.To comply with the operation criteria, the maximum output current is reduced to 9A.3 pins are equipped with it.There is an electrical component included in the Automotive, AEC-Q101 series.Self-contained in an econtainer with a capacity of FET General Purpose Power, this LED driver is self-contained.As well as producing ESD PROTECTED, this LED driving board is capable of producing [1].There are a total of 1 elements.To name a few, the lighting driver has SWITCHING transistor application.
NID9N05CLG Features
Additional features like ESD PROTECTED
Transistor applications such as SWITCHING
NID9N05CLG Applications
There are a lot of ON Semiconductor NID9N05CLG Power Switches ICs applications.
- USB Ports/Hubs
- Hot-Swap Systems
- PC Cards
- Portable GPS Device
- Hot Swaps
- Portable Devices
- Hard Disk Drives
- USB3.1 Power Delivery
- Hot Swap
- Portable Video Game Players
