NID9N05CLT4
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Transistor Element Material | SILICON |
| Operating Temperature | -55°C~175°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q101 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Resistance | 153mOhm |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Additional Feature | ESD PROTECTED |
| Subcategory | FET General Purpose Power |
| Voltage - Rated DC | 52V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Reach Compliance Code | not_compliant |
| Current Rating | 9A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NID9N05CL |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 1.74W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Transistor Application | SWITCHING |
| Rise Time | 500ns |
| Drain to Source Voltage (Vdss) | 52V |
| Fall Time (Typ) | 1.8 μs |
| Turn-Off Delay Time | 2.5 μs |
| Continuous Drain Current (ID) | 9A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 15V |
| Voltage - Load | 52V Max |
| Drain Current-Max (Abs) (ID) | 9A |
| Fault Protection | Over Voltage |
| Drain to Source Breakdown Voltage | 52V |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 90m Ω |
| Drain to Source Resistance | 90mOhm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NID9N05CLT4 Overview
It is packaged in the form of a Tape & Reel (TR).In the TO-252-3, DPak (2 Leads + Tab), SC-63 package, it is included.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of Relay, Solenoid Driver.To ensure reliable performance, the temperature should be set to -55°C~175°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the NID9N05CL family.The termination count is 2.In order to operate, the 3 pins are used.It is necessary to reduce the maximum output current to 9A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.As a result, it has a total of 3 pins.There is 153mOhm resistance on the LED driver.A component of this type is included in the Automotive, AEC-Q101 series.A self-contained LED driver with a capacity of FET General Purpose Power is contained in an econtainer.As well as producing ESD PROTECTED, this LED driving board is capable of producing [1].A total of 1 elements have been found.There is SWITCHING transistor application in the LED driver.
NID9N05CLT4 Features
Resistance of 153mOhm
Additional features like ESD PROTECTED
Transistor applications such as SWITCHING
NID9N05CLT4 Applications
There are a lot of ON Semiconductor NID9N05CLT4 Power Switches ICs applications.
- Wireless/Networking Cards
- Notebook PC
- Portable Music Players
- Wearable Devices
- Wireless Headsets
- Hard Disk Drives
- Portable GPS Device
- Low Voltage I/O System Power
- USB Ports/Hubs
- Storage Drives
