Parameters |
Dual Supply Voltage |
52V |
FET Technology |
METAL-OXIDE SEMICONDUCTOR |
Rds On (Typ) |
90m Ω |
Drain to Source Resistance |
90mOhm |
Nominal Vgs |
1.75 V |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Lifecycle Status |
CONSULT SALES OFFICE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-3, DPak (2 Leads + Tab), SC-63 |
Number of Pins |
3 |
Transistor Element Material |
SILICON |
Operating Temperature |
-55°C~175°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Series |
Automotive, AEC-Q101 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
2 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
90MOhm |
Terminal Finish |
Tin (Sn) |
Additional Feature |
ESD PROTECTED |
Subcategory |
FET General Purpose Power |
Voltage - Rated DC |
52V |
Max Power Dissipation |
28.8W |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Current Rating |
9A |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NID9N05CL |
Pin Count |
3 |
JESD-30 Code |
R-PSSO-G2 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
9A |
Number of Elements |
1 |
Interface |
On/Off |
Element Configuration |
Single |
Output Configuration |
Low Side |
Operating Mode |
ENHANCEMENT MODE |
Power Dissipation |
28.8W |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Case Connection |
DRAIN |
Input Type |
Non-Inverting |
Switch Type |
Relay, Solenoid Driver |
Clamping Voltage |
59V |
Transistor Application |
SWITCHING |
Rise Time |
500ns |
Drain to Source Voltage (Vdss) |
52V |
Fall Time (Typ) |
1.8 μs |
Turn-Off Delay Time |
2.5 μs |
Continuous Drain Current (ID) |
9A |
Threshold Voltage |
1.75V |
Ratio - Input:Output |
1:1 |
Gate to Source Voltage (Vgs) |
15V |
Voltage - Load |
52V Max |
Drain Current-Max (Abs) (ID) |
9A |
Fault Protection |
Over Voltage |
Drain to Source Breakdown Voltage |
52V |
NID9N05CLT4G Overview
The LED driver's packaged as a Tape & Reel (TR).There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.This LED driving board is mounted using the mounting type Surface Mount.The switch type is Relay, Solenoid Driver.It is recommended that the temperature be set to -55°C~175°C TJ for reliable performance.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.This object belongs to the NID9N05CL family.It consists of 2 terminations in total.It is necessary to use the 3 pins in order to operate the LED driver.To meet the operation criteria, the maximum output current drops to 9A.This lighting driver is mounted in the way of Surface Mount.3 pins are connected to it in total.It has 90MOhm resistance.This electrical component is part of the Automotive, AEC-Q101 series.This LED driver is self-contained in an econtainer with a capacity of FET General Purpose Power.ESD PROTECTED can also be produced by using this LED driver.A total of 1 elements are present in this list.As far as transistor application is concerned, the LED driver has SWITCHING.
NID9N05CLT4G Features
Resistance of 90MOhm
Additional features like ESD PROTECTED
Transistor applications such as SWITCHING
NID9N05CLT4G Applications
There are a lot of ON Semiconductor NID9N05CLT4G Power Switches ICs applications.
- Low Voltage I/O System Power
- Set-Top Boxes
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- Mobile Communication Devices
- Hard Disk Drives
- Portable/Handheld Devices
- USB Power Distribution
- Portable GPS Device
- Solid State Drivers