NIF5002NT1G
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | CONSULT SALES OFFICE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | HDPlus™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 165mOhm |
| Terminal Finish | Tin (Sn) |
| Voltage - Rated DC | 42V |
| Max Power Dissipation | 1.7W |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Current Rating | 2A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NIF5002N |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 1.7W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 42V |
| Drain to Source Voltage (Vdss) | 42V |
| Continuous Drain Current (ID) | 2A |
| Threshold Voltage | 1.8V |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 14V |
| Voltage - Load | 42V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Dual Supply Voltage | 42V |
| Turn On Time | 30 µs |
| Output Peak Current Limit-Nom | 5.7A |
| Rds On (Typ) | 165m Ω |
| Drain to Source Resistance | 165mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Nominal Vgs | 1.8 V |
| Output Current Flow Direction | SINK |
| Height | 1.57mm |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
NIF5002NT1G Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The TO-261-4, TO-261AA package includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -55°C~150°C TJ.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.A lighting driver with Auto Restart, Slew Rate Controlled features is available.I believe it belongs to the NIF5002N family.It is necessary to use the 4 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 2A when operation criteria are met.This lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 4 pins.It has a resistance of 165mOhm.A component of this type is included in the HDPlus? series.
NIF5002NT1G Features
Resistance of 165mOhm
NIF5002NT1G Applications
There are a lot of ON Semiconductor NIF5002NT1G Power Switches ICs applications.
- PDAs
- Handheld Devices
- Wireless/Networking Cards
- Wireless Modem Data Cards
- Hot Swap
- Portable Music Players
- Notebook PC
- Notebook and Tablet Computers
- USB Power Distribution
- Storage (HDDs, SSDs)
