NIF62514T1G
| Parameters | |
|---|---|
| Lifecycle Status | CONSULT SALES OFFICE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | HDPlus™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 90MOhm |
| Terminal Finish | Tin (Sn) |
| Voltage - Rated DC | 40V |
| Max Power Dissipation | 8.93W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Current Rating | 6A |
| Base Part Number | NIF62514 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 8.93W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 40V |
| Rise Time | 11μs |
| Drain to Source Voltage (Vdss) | 40V |
| Fall Time (Typ) | 27 μs |
| Turn-Off Delay Time | 32 μs |
| Continuous Drain Current (ID) | 6A |
| Threshold Voltage | 1.7V |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 16V |
| Voltage - Load | 42V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Dual Supply Voltage | 40V |
| Rds On (Typ) | 90m Ω |
| Drain to Source Resistance | 90mOhm |
| Built-in Protections | OVER CURRENT; THERMAL; TRANSIENT |
| Nominal Vgs | 1.7 V |
| Height | 1.57mm |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NIF62514T1G Overview
Tape & Reel (TR) is how it's packaged.This package is included in TO-261-4, TO-261AA.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.Ensure reliable operation by setting the temperature to -55°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.This LED driving board is equipped with Auto Restart, Slew Rate Controlled features in order for it to be useful.The NIF62514 family contains this object.It contains 4 terminations.It is necessary to use the 4 pins in order to operate the LED driver.The LED driver has 1 functions.This results in the maximum output current dropping to 6A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.There are 4 pins in total on this board.It has 90MOhm resistance.These electrical components are part of the HDPlus? series.
NIF62514T1G Features
Resistance of 90MOhm
NIF62514T1G Applications
There are a lot of ON Semiconductor NIF62514T1G Power Switches ICs applications.
- Hot-Swap Systems
- Portable Devices
- Portable/Handheld Devices
- Smartphone and PDA
- Solid-State Drives
- Wearable Devices
- Low Voltage I/O System Power
- Notebook and Tablet Computers
- Wireless Headsets
- Hot Swap
