NIF62514T3G
| Parameters | |
|---|---|
| Lifecycle Status | CONSULT SALES OFFICE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | HDPlus™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Finish | Tin (Sn) |
| Voltage - Rated DC | 40V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Current Rating | 6A |
| Base Part Number | NIF62514 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 8.93W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 11μs |
| Drain to Source Voltage (Vdss) | 40V |
| Fall Time (Typ) | 27 μs |
| Turn-Off Delay Time | 32 μs |
| Continuous Drain Current (ID) | 6A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 16V |
| Voltage - Load | 42V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Rds On (Typ) | 90m Ω |
| Drain to Source Resistance | 90mOhm |
| Built-in Protections | OVER CURRENT; THERMAL; TRANSIENT |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NIF62514T3G Overview
Tape & Reel (TR) is the way it's packaged.This package is included in TO-261-4, TO-261AA.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.The temperature should be set to -55°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A lighting driver with Auto Restart, Slew Rate Controlled features is available.It is part of the NIF62514 family of LED drivers.A total of 4 terminations have been recorded.The 4 pins are used to operate the LED driver.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.It is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.It has a resistance of 90mOhm.This electrical component is included in the HDPlus? series.
NIF62514T3G Features
Resistance of 90mOhm
NIF62514T3G Applications
There are a lot of ON Semiconductor NIF62514T3G Power Switches ICs applications.
- Portable Video Game Players
- USB Ports/Hubs
- USB Power Distribution
- USB3.1 Power Delivery
- Hot Swap
- Hard Disk Drives
- Portable Devices
- Hot Swap
- Set-Top Boxes
- Smart Phones, Feature Phones
