NIS6111QPT1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerQFN |
| Number of Pins | 32 |
| Diode Element Material | SILICON |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BERS™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 11 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Flyback, Forward Converters |
| HTS Code | 8541.10.00.80 |
| Subcategory | Rectifier Diodes |
| Voltage - Rated DC | 24V |
| Voltage - Supply | 4.8V~5.2V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Reach Compliance Code | not_compliant |
| Current Rating | 30A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NIS6111 |
| Pin Count | 32 |
| JESD-30 Code | S-PQCC-N11 |
| Qualification Status | Not Qualified |
| Max Output Current | 30A |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Configuration | COMPLEX |
| Operating Supply Current | 1.3mA |
| Turn On Delay Time | 45 ns |
| FET Type | N-Channel |
| Turn-Off Delay Time | 35 ns |
| Number of Phases | 1 |
| Ratio - Input:Output | N:1 |
| Non-rep Pk Forward Current-Max | 90A |
| Internal Switch(s) | Yes |
| Forward Voltage-Max | 1.2V |
| Reverse Recovery Time-Max | 0.0365μs |
| Delay Time - ON | 45ns |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NIS6111QPT1 Overview
The case that it comes in is called 32-PowerQFN case. In Tape & Reel (TR) cases, the part will be well protected. Part Surface Mount is mounted. It is given a voltage of 4.8V~5.2V. It is not allowed for this component to operate below -40°C~125°C degrees. A component connected in Flyback, Forward Converters would be a good fit for it. N+1 ORing Controller is the category for the device. N-Channel is the type of FET. 11 terminations are available in the part. The device is designed with 32 pins. NIS6111 is the basis for the part. In order to run 240, a part's peak reflow temperature is utilized. There is a part of the Rectifier Diodes family that is used in this part. As you can see, the part is equipped with 32 pins. In order for it to operate, it uses a supply current called 1.3mA. In order to mount the part properly, it is recommended to mount it by Surface Mount. It is possible to deliver the part under a 30A output current. There is a device in the BERS? series that belongs to the market. In order for this device to function, it requires a supply voltage of 5V.
NIS6111QPT1 Features
in a 32-PowerQFN case
FET Type: N-Channel
11 terminations
Peak Reflow Temperature (Cel) : 240
operate supply voltage at 5V
NIS6111QPT1 Applications
There are a lot of ON Semiconductor NIS6111QPT1 Ideal Diode controller applications.
- PCs
- Active OR-ing of Redundant (N+1) Power Supplies
- Industrial transport
- Building automation
- Factory automation and control - PLC digital output modules
- USB HUBs
- Active ORing for redundant power
- Active ORing for redundant power supplies
- Power supply reverse polarity protection
- Power Tools
