Parameters |
Surface Mount |
YES |
Number of Pins |
8 |
JESD-609 Code |
e6 |
Pbfree Code |
yes |
Number of Terminations |
8 |
Terminal Finish |
Tin/Bismuth (Sn/Bi) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Comparators |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
TOTEM POLE |
Temperature Grade |
COMMERCIAL EXTENDED |
Number of Channels |
1 |
Max Supply Voltage |
36V |
Min Supply Voltage |
5V |
Power Dissipation-Max |
300mW |
Nominal Supply Current |
4.3mA |
Max Supply Current |
7.5mA |
Current - Output |
5.1mA |
Response Time |
200 ns |
Amplifier Type |
COMPARATOR |
Current - Input Bias |
250nA |
Output Current per Channel |
5.1mA |
Input Offset Voltage (Vos) |
7.5mV |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Voltage Gain |
106dB |
Average Bias Current-Max (IIB) |
0.25μA |
Bias Current-Max (IIB) @25C |
0.25μA |
Height Seated (Max) |
2mm |
Length |
5mm |
Width |
5mm |
RoHS Status |
RoHS Compliant |
NJM311M-TE1 Overview
The comparator has a type TOTEM POLE output.There are8 terminals on the comparator.The electrical component in this case belongs to the Comparators families.When supplied with 15V voltage, the comparator is capable of performing a wide range of tasks.The pinout of the component starts from 8 pins it has.There are 8 pins on the comparator.Normally, the nominal supply current should be 4.3mA when using the device.If the current supply exceeds 7.5mA , the comparator could malfunction.Based on the voltage formula, the voltage gain of the part is 106dB .Comparator electronics is not recommended to operate the system at a temperature above 85°C .A temperature lower than -40°C is unsuitable for the device.Comparator electronics is specified that the comparator's maximum supply voltage is 36V .The comparator is capable of operating at a minimum supply voltage of 5V .For the output quality to be maintained, 1 channels work together.This comparator basically consists of a COMPARATOR amplifier with very high gain.Comparator electronics has an output current rated at 5.1mA .
NJM311M-TE1 Features
TOTEM POLE output capability
Voltage Gain: 106dB
COMPARATOR amplifier
NJM311M-TE1 Applications
There are a lot of New Japan Radio (NJR) NJM311M-TE1 linear comparators applications.
- Threshold Detectors
- Window Comparators
- Simple Analog-to-Digital Converters (ADCs)
- General Purpose Low Voltage Applications
- Analog front end
- Lithium ion battery monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Appliances
- Battery-Powered Electronics
- Body Control Modules