NJM311M-TE3
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 8 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | TOTEM POLE |
| Temperature Grade | COMMERCIAL EXTENDED |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 300mW |
| Nominal Supply Current | 7.5mA |
| Max Supply Current | 7.5mA |
| Response Time | 200 ns |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 250nA |
| Input Offset Voltage (Vos) | 7.5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Height Seated (Max) | 2mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
NJM311M-TE3 Overview
There is a comparator of type TOTEM POLE output on this device.You can find 8 terminals of the comparator.The chip belongs to Comparator .With a 15V voltage supply, the comparator can perform multiple demanding tasks.There are 8 pins on this board.8 pins are present on the comparator.For normal use of the device, the nominal supply current should be 7.5mA .A current supply greater than 7.5mA may result in the comparator malfunctioning.Based on the voltage formula, the voltage gain of the part is 106dB .Comparator electronics is not recommended to operate at a temperature higher than 85°C .Temperature lower than -40°C is not suitable for the it.In the comparator, the maximum supply voltage is 36V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 5V .In order to maintain the quality of the output, 1 channels cooperate together.Comparator electronics is essentially a highly gain-adjustable COMPARATOR amplifier that forms the comparator.
NJM311M-TE3 Features
TOTEM POLE output capability
Voltage Gain: 106dB
COMPARATOR amplifier
NJM311M-TE3 Applications
There are a lot of New Japan Radio (NJR) NJM311M-TE3 linear comparators applications.
- Analog front end
- Appliances
- Automatic Test Equipment
- Current and voltage sensing
- Portable Battery Monitoring
- Ultra-Low Power Systems
- Wearable Devices
- Body Control Modules
- Laptop Computers
- General-Purpose Portable Devices
