NL17SZ17DFT2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SC |
| Number of Pins | 70 |
| Packaging | Tape and Reel |
| Published | 2007 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 5 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -55°C |
| Subcategory | Gates |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation-Max | 186mW |
| Load Capacitance | 50pF |
| Propagation Delay | 5.9 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 15.6 ns |
| Logic Function | Buffer, Schmitt Trigger |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 1 |
| Prop. Delay@Nom-Sup | 7.5 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Schmitt Trigger | YES |
| Length | 2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
NL17SZ17DFT2 Overview
Logical driver uses a neat SC package. Tape and Reel external packaging. 5 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. 5 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 70 pins. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Gates. In quiescent state, the electronic part uses 1μA. It is recommended to use a 3.3V power supply. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 32mA to its low level. In high level output mode, the electronic parts may conduct -32mA of current. Voltage used to run voltage buffer should be 1.65V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is sufficient to make 1 outputs.
NL17SZ17DFT2 Features
Gates
High Level Output: 32mA
Low Level Output: -32mA
NL17SZ17DFT2 Applications
There are a lot of ON Semiconductor NL17SZ17DFT2 Buffers & Transceivers applications.
- Gigabit Ethernet
- Single fiber bidirectional application
- Clock radio
- Broadcast application
- Cell phones
- Single to Multimode Fiber Conversion
- Wireless HD Photography
- Car alarm systems
- Satellite communications networks
- Bar, KTV wireless entertainment
