NL27WZ07DFT2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-363 |
| Number of Pins | 88 |
| Packaging | Tape and Reel |
| Published | 2011 |
| JESD-609 Code | e0 |
| Number of Terminations | 6 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Gates |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation-Max | 200mW |
| Load Capacitance | 50pF |
| Propagation Delay | 3.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 12 ns |
| Logic Function | Buffer, Inverting |
| Output Characteristics | OPEN-DRAIN |
| Number of Bits per Element | 1 |
| Prop. Delay@Nom-Sup | 4.8 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Schmitt Trigger | NO |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
NL27WZ07DFT2 Overview
Logical driver uses a neat SOT-363 package. Tape and Reel external packaging. All of the 2 elements are put into use. 6 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. 6 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 88 pins. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Gates. In quiescent state, the electronic part uses 1μA. It is recommended to use a 3.3V power supply. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 32mA to its low level. In high level output mode, the electronic parts may conduct -32mA of current. Voltage used to run voltage buffer should be 1.65V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V.
NL27WZ07DFT2 Features
Gates
High Level Output: 32mA
Low Level Output: -32mA
NL27WZ07DFT2 Applications
There are a lot of ON Semiconductor NL27WZ07DFT2 Buffers & Transceivers applications.
- WDM transmission
- Car radio
- Long-distance fiber optic network applications
- 1x/2x Fiber Channel
- Wireless security systems
- Satellite ground stations
- Changeing the frequency from IF to RF
- Remote controls
- Fast Ethernet
- Gigabit Ethernet
