NL7SZ18DFT2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 7SZ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Demultiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 7SZ18 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Throw Configuration | SPDT |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Number of Output Lines | 2 |
| Input Conditioning | STANDARD |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NL7SZ18DFT2 Overview
For the purpose of saving board space, digital switch is included in the 6-TSSOP, SC-88, SOT-363.The package is packaged in accordance with Tape & Reel (TR).Mounting is performed using Surface Mount.Demultiplexer is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Design engineers have more flexibility when digital controlled switch operates at 1.65V~5.5V voltage.With the 7SZ series, the multiplexers are suitable for a diverse range of applications.It is designed with 6 terminations as part of its basic configuration.There is a base part number 7SZ18 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 1.8V voltage.This turn signal switch contains 6 component pins.As a result, conductors end at GULL WING.Single is used as its supply type.It is positioned in the direction of Surface Mount.Among the family of LVC/LCX/Z the logic switch is a member.Keeping Vsup at 5.5V will prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 3.3V.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.The switches package is packaged in accordance with the TAPE AND REEL method.The multiplexers have 1 input lines used to accept voltage levels.A signal source has 2 output lines.
NL7SZ18DFT2 Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
Power supplies of 3.3V
1 input lines
2 output lines
NL7SZ18DFT2 Applications
There are a lot of ON Semiconductor NL7SZ18DFT2 Signal Switches / Multiplexers / Decoders applications.
- Transmission from the computer system of a satellite
- High-performance memory systems
- Encrypted communications system
- HDMI applications
- Data transfer
- Time division multiplexing system
- Automation system
- Analog to digital conversion
- Relay
- Control unit of Central Processing unit (CPU)
