NL7SZ18DFT2G
| Parameters | |
|---|---|
| Propagation Delay | 12.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 12.5 ns |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 7SZ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7SZ18 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Throw Configuration | DPST |
NL7SZ18DFT2G Overview
It is included in the 6-TSSOP, SC-88, SOT-363 in order to save board space.In this case, it is packaged as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC is indicated by Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Designers have greater flexibility when digital controlled switch operates at a 1.65V~5.5V supply voltage.Multiplexers from the 7SZ series can be used in a wide range of applications.As part of its basic configuration, 6 terminations are designed as a part of it.As its base part number is 7SZ18, logic switch can also be used to find its related parts.The multiplexer's system is powered by 1.8V voltage.Currently, this turn signal switch has a total of 6 component pins.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.A configuration of 6 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of LVC/LCX/Z.Keeping Vsup at 5.5V will prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 3.3V.As a result, the turn signal switch consists of 2 outputs.This is a signal switch that is categorized as Decoder/Drivers.Without the influence of external factors, it consumes 1μA current of multiplexer ic.The switches packaging is based on TAPE AND REEL.The configuration of the mux switch contains 1 elements.
NL7SZ18DFT2G Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
Power supplies of 3.3V
NL7SZ18DFT2G Applications
There are a lot of ON Semiconductor NL7SZ18DFT2G Signal Switches / Multiplexers / Decoders applications.
- Data demultiplexing
- Electronics industry
- Code converters
- Image transmission
- Frequency multiplexing system
- Data distribution
- Electronic circuits
- Enabling different rows of memory depending on address in memory chips
- Communication system
- VGA
