NL7SZ19DFT2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 7SZ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Tin (Sn) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7SZ19 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Throw Configuration | DPST |
| Propagation Delay | 11 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 11 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer, Demux |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NL7SZ19DFT2G Overview
This is a relatively small item of digital switch that is included in the 6-TSSOP, SC-88, SOT-363 in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Design engineers have more flexibility when digital controlled switch operates at 1.65V~5.5V voltage.Several applications are possible for 7SZ series multiplexers.As part of its basic configuration, 6 terminations are designed as a part of it.The base part number is 7SZ19, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 1.8V is supplied.In this turn signal switch, there are 6 components that can be connected to each pin.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is used as its supply type.A total of 6 pins are configured on this board.Surface Mount is the way it is mounted.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.Keeping Vsup at 5.5V will prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 3.3V.The turn signal switch contains 2 outputs designed to operate.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.There are no external influences on this multiplexer ic, so it consumes 1μA current.The switches package is packaged in a way which is consistent with TAPE AND REEL.There are 1 elements used for the mux switch configuration.
NL7SZ19DFT2G Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
Power supplies of 3.3V
NL7SZ19DFT2G Applications
There are a lot of ON Semiconductor NL7SZ19DFT2G Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Paper plants
- Code conversion
- Solenoid cooling fan
- LVDS
- Automation system
- Signal router
- War field flying robot with a night vision flying camera
- RF-based home automation system
- Encrypted communications system
