Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-UFDFN |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
Series |
7SZ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Decoder/Drivers |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
1.65V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.4mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
7SZ19 |
Pin Count |
6 |
Number of Outputs |
2 |
Qualification Status |
Not Qualified |
Circuit |
1 x 1:2 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3V |
Load Capacitance |
50pF |
Power Dissipation |
180mW |
Propagation Delay |
11 ns |
Quiescent Current |
1μA |
Family |
LVC/LCX/Z |
Logic Function |
Decoder, Demultiplexer |
Number of Inputs |
1 |
Halogen Free |
Halogen Free |
Current - Output High, Low |
32mA 32mA |
Supply Type |
Single |
Prop. Delay@Nom-Sup |
5.4 ns |
Voltage Supply Source |
Single Supply |
Input Conditioning |
STANDARD |
Height Seated (Max) |
0.55mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NL7SZ19MUR2G Overview
Due to the fact that it is provided in the 6-UFDFN, digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 1.65V~5.5V supply voltage.The multiplexers from 7SZ series can be used for a wide range of applications.Among its basic configurations are 6 terminations.There is a base part number 7SZ19 that can be used to locate signal switch's related components as well.The voltage supplied for multiplexer's system is 1.8V.multiplexer's systemSignal switch has 6 component pins.As the end of conductors, it uses NO LEAD.There is a type of supply of Single.There are 6 pins on it.It is positioned in the direction of Surface Mount.The logic switch is a member of the family of LVC/LCX/Z.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.In order for 3.3V to operate normally, a power supply is provided.In order for the turn signal switch to work, there are 2 outputs.Decoder/Drivers is a category for the digital switch ics.In the absence of external influences, it consumes 1μA current of multiplexer ic.There are 1 inputs provided in this multiplexer.Currently, the switches is packaged in accordance with the TAPE AND REEL method.
NL7SZ19MUR2G Features
Supplied in the 6-UFDFN package
Adopting a supply type of Single
Power supplies of 3.3V
NL7SZ19MUR2G Applications
There are a lot of ON Semiconductor NL7SZ19MUR2G Signal Switches / Multiplexers / Decoders applications.
- Microprocessor memory systems
- Video transmission
- HDMI applications
- Used to connect a single source to multiple destinations
- Enabling different rows of memory depending on address in memory chips
- Paper plants
- Electronically controlled engine system
- CPU memory location identification
- Time division multiplexing system
- Seven segment displays