NLAS1053US
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 22Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NLAS1053 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 2.5/5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 1μA |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 12 ns |
| Supply Type | Single |
| Bandwidth | 170MHz |
| Supply Current-Max (Isup) | 0.002mA |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 16Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 8ns, 8ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
| Height Seated (Max) | 0.9mm |
| Length | 2.3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NLAS1053US Overview
The electronic component is convenient to ship overseas because it is packed in a 8-VFSOP (0.091, 2.30mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -55°C~125°C TA extended. In total, 8 terminations have occurred. A electrical component with 2 channels is capable of high-quality output. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 8 series. Circuits based on SPDT switching are used to construct these analog switch ics. 1 circuits are used in this analogue multiplexer. Search with NLAS1053 if you are looking for analog multiplexer variants. Analog switches have 22Ohm internal resistance. The functions of 8 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. The digital multiplexer has a low cost Single supply. In order to operate this switch device, it would need a current of 1μA. Using only a single voltage supply, this analog switch requires 2V~5.5V voltage. There is a voltage range of 5.5V operating voltages for the electrical part. There are 170MHz bandwidths for data transfer.
NLAS1053US Features
2 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 170MHz
NLAS1053US Applications
There are a lot of ON Semiconductor NLAS1053US Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- SDH
- Sample hold systems
- Automotive applications
- Audio and video signal routing
- Industrial and process control systems
- Cable PC
- Medical
