Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-VFSOP (0.091, 2.30mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
70Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
250mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NLAS1053 |
Pin Count |
8 |
Number of Channels |
2 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Nominal Supply Current |
1μA |
Power Dissipation |
250mW |
Propagation Delay |
18 ns |
Turn On Delay Time |
12 ns |
Number of Inputs |
2 |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Bandwidth |
170MHz |
Turn-Off Delay Time |
12 ns |
-3db Bandwidth |
200MHz |
On-State Resistance (Max) |
16Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
93 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
On-state Resistance Match-Nom |
3Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
8ns, 8ns |
Charge Injection |
3pC |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
2V~5.5V |
Signal Current-Max |
0.05A |
Height |
800μm |
Length |
2.4mm |
Width |
2.1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NLAS1053USG Overview
Presented in 8-VFSOP (0.091, 2.30mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -55°C~125°C TA degrees Celsius. 8 terminations have been made so far. By its 2 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 4.5V voltage supply. It is injected into the electrical part body with 8 pins. SPDT switching circuits are used in these analog switch ics. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with NLAS1053. The internal resistance of this digital multiplexer is 70Ohm. For details about the functions of 8 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2V. This digital switch can be operated with a current of 1μA. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. It is possible to operate 2 inputs. A 170MHz-bandwidth can be used for data transfer.
NLAS1053USG Features
2 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 170MHz
NLAS1053USG Applications
There are a lot of ON Semiconductor NLAS1053USG Analog Switches & Multiplexers ICs applications.
- RGB switches
- Cable PC
- Audio and video switching
- Digital Cross-Connects
- Audio/video switches
- PBXs
- Residential Gateways, Home Gateway/Router
- Voice over IP/DSL – Integrated Access Devices, Smart
- Communications systems
- Sample hold systems