NLAS2066USG

3ns, 6ns SPST - NO 7Ohm DUAL Analog Switches MAKE-BEFORE-BREAK NLAS2066 8 Pins 1nA 2.3V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-NLAS2066USG
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: PDF
Stock: 641
Description: 3ns, 6ns SPST - NO 7Ohm DUAL Analog Switches MAKE-BEFORE-BREAK NLAS2066 8 Pins 1nA 2.3V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	3ns, 6ns
Charge Injection	7.4pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Switching	MAKE-BEFORE-BREAK
Switch-off Time-Max	11ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height	800μm
Length	2.1mm
Width	2.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	7Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	250mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	NLAS2066
Pin Count	8
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	2μA
Power Dissipation	250mW
Throw Configuration	SPST
Turn On Delay Time	9 ns
Halogen Free	Halogen Free
Supply Type	Single
Bandwidth	186MHz
Turn-Off Delay Time	10 ns
On-State Resistance (Max)	7Ohm
High Level Output Current	50mA
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	1.3Ohm

NLAS2066USG Overview

Shipping overseas is convenient due to the electrical component's packing in 8-VFSOP (0.091, 2.30mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -55°C~125°C TA. Total terminations are 8. By its 2 channels, the electronic component provides high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. There is an electrical component included in the 8 series. A SPST - NO switching circuit is used for these analog switches. Try searching with NLAS2066 if you're looking for variants. There is 7Ohm internal resistance in this digital multiplexer. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 1.65V. The analogue multiplexer could operate on 1μA current. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. It can operate from 5V operating voltages. The data can be transferred over a wide range of bandwidths, called 186MHz bandwidths.