NLAS2066UST3

3ns, 6ns SPST - NO 7Ohm DUAL Analog Switches MAKE-BEFORE-BREAK NLAS2066 8 Pins 1nA 2.3V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-NLAS2066UST3
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: PDF
Stock: 510
Description: 3ns, 6ns SPST - NO 7Ohm DUAL Analog Switches MAKE-BEFORE-BREAK NLAS2066 8 Pins 1nA 2.3V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	7Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Multiplexer or Switches
Max Power Dissipation	250mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	2.3V
Terminal Pitch	0.5mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	NLAS2066
Output	SEPARATE OUTPUT
Pin Count	8
Qualification Status	Not Qualified
Operating Supply Voltage	3V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	9 ns
Supply Type	Single
Turn-Off Delay Time	10 ns
-3db Bandwidth	186MHz
On-State Resistance (Max)	7Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	1.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	3ns, 6ns
Charge Injection	7.4pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height Seated (Max)	0.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

NLAS2066UST3 Overview

This electronic part is conveniently packaged in 8-VFSOP (0.091, 2.30mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -55°C~125°C TA. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. An 2.3V voltage supply should allow the electrical part to be turned on and run. There are 8 pins injected into the electronic part body. Based on SPST - NO switching circuits, these analog multiplexers work. The multiplexer consists of 2 circuits. Try searching with NLAS2066 to find analog multiplexer variants. As far as internal resistance is concerned, it has 7Ohm. The datasheets for the 8 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analog switch ics with Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 1.65V. 1μA current would be enough for this multiplexer to operate. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electronic component can function from 3V.