Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
LAST SHIPMENTS (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-VFSOP (0.091, 2.30mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2004 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
7Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
250mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NLAS2066 |
Output |
SEPARATE OUTPUT |
Pin Count |
8 |
Operating Supply Voltage |
3V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
1μA |
Power Dissipation |
250mW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
9 ns |
Number of Inputs |
2 |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Turn-Off Delay Time |
10 ns |
-3db Bandwidth |
186MHz |
On-State Resistance (Max) |
7Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
73 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
On-state Resistance Match-Nom |
1.3Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
3ns, 6ns |
Charge Injection |
7.4pC |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Switching |
MAKE-BEFORE-BREAK |
Switch-off Time-Max |
11ns |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Normal Position |
NO |
Height Seated (Max) |
0.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NLAS2066UST3G Overview
Due to its 8-VFSOP (0.091, 2.30mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 8. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. A SPST - NO switching circuit is used for these analog switches. Use NLAS2066 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 7Ohm. To find out what the 8 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 1.65V. The analogue multiplexer could operate on 1μA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. This analog switch ic utilizes SEPARATE OUTPUT output. 3V operating voltages can be used with this electrical part. A 2 input needs to be operated.
NLAS2066UST3G Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 186MHz
NLAS2066UST3G Applications
There are a lot of ON Semiconductor NLAS2066UST3G Analog Switches & Multiplexers ICs applications.
- SONET
- Frame Relay Equipment
- FTTH
- Cable Modem
- Industrial control systems
- Precision instrumentation
- Audio and video routing
- PDAs
- New designs requiring multiplexer functions
- PCMCIA cards