NLAS3158MNR2G
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 180mW |
| Turn On Delay Time | 23 ns |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 12.5 ns |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 13Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 2.3pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.2ns, 3.5ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 850μm |
| Length | 3mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN |
| Number of Pins | 12 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Resistance | 13Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS3158 |
| Pin Count | 12 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
NLAS3158MNR2G Overview
Presented in 12-WFDFN, this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -55°C~125°C TA are extended for operation. In total, 12 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 2.3V, it should be turned on and run. The electrical component body receives 12 pins. Unlike digital switches, these are based on SPDT switching circuits. NLAS3158 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 13Ohm. The functions of 12 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The digital multiplexer has a low cost Single supply. The lowest voltage fed to the electronic component should be 1.65V. It would be sufficient to run this analogue multiplexer with 1μA current. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. Operating voltages range from 5V. A 2 input needs to be operated. In this digital multiplexer, there are 4 outputs.
NLAS3158MNR2G Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 250MHz
NLAS3158MNR2G Applications
There are a lot of ON Semiconductor NLAS3158MNR2G Analog Switches & Multiplexers ICs applications.
- ATM
- PCMCIA cards
- Automatic test equipment
- Microprocessor Controlled Analog Systems
- Transmit
- DVD-R
- Private Branch Exchange (PBX)
- Audio signal routing
- Switching Systems
- Cable Modem
