NLAS323US
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 220MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 9ns, 10ns |
| Charge Injection | 3pC |
| Switch-off Time-Max | 16ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Height Seated (Max) | 0.9mm |
| RoHS Status | Non-RoHS Compliant |
NLAS323US Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-VFSOP (0.091, 2.30mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. A total of 8 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. A total of 8 pins are injected into the body of the electronic part. A SPST - NO switching circuit is used to build these analog multiplexers. The multiplexer consists of 2 circuits. A voltage of 2V~5.5V is required to drain this analog switch from a single voltage supply.
NLAS323US Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 220MHz
NLAS323US Applications
There are a lot of Rochester Electronics, LLC NLAS323US Analog Switches & Multiplexers ICs applications.
- Medical
- Cable Modem
- Ultrasound
- Digital cross connects (DSX-1)
- CSU
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Private Branch Exchange (PBX)
- Optical Applications
- Audio/video switches
- Medical systems
