NLAS323USG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 45Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS323 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 250mW |
| Throw Configuration | SPST |
| Turn On Delay Time | 14 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 22 ns |
| -3db Bandwidth | 220MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 9ns, 10ns |
| Charge Injection | 3pC |
| Switching | MAKE-BEFORE-BREAK |
| Switch-off Time-Max | 16ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Height | 800μm |
| Length | 2.4mm |
| Width | 2.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
NLAS323USG Overview
Due to its 8-VFSOP (0.091, 2.30mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -55°C~125°C TA. In total, there have been 8 terminations. Due to its 2 channels, the electrical component produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. As part of the design of the 8 series, this electronic part has been incorporated into the system. Multiplexers built on a SPST - NO switching circuit are built. Search with NLAS323 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 45Ohm. Datasheets for 8 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. 2V should be the lowest voltage fed to the electronic component. This multiplexer would work with 1μA current. Using a single voltage supply, this switch device consumes 2V~5.5V volts. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. Operating voltages of 5V are compatible with the electrical part.
NLAS323USG Features
2 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 220MHz
NLAS323USG Applications
There are a lot of ON Semiconductor NLAS323USG Analog Switches & Multiplexers ICs applications.
- Communication systems
- Central office
- SONET
- Channel Banks
- Fiber In The Loop (FITL)
- Microprocessor Controlled Analog Systems
- Industrial and process control systems
- Private Branch Exchange (PBX)
- Data switching
- Intelligent PBX
