NLAS3699BMN1R2G
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 700mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS3699B |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 50 ns |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 20MHz |
| On-State Resistance (Max) | 550mOhm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500nA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 50ns |
| Charge Injection | 50pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -62dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAS3699BMN1R2G Overview
This electronic part is conveniently packaged in 16-VFQFN Exposed Pad, making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 2:2. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 16 terminations. A 2 channel electronic part produces high-quality output. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the body of the electronic part. A DPDT switching circuit is used to build these analog multiplexers. Circuits number 2 make up this analogue multiplexer. Try searching for the analog switch ic with NLAS3699B if you are looking for variants. An switch multiplexer with 700mOhm internal resistance has a value of 700mOhm. Datasheets for functions of 16 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 4.5V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 1.65V. This multiplexer would work with 2μA current. An analogue multiplexer drains from a single voltage supply at 1.65V~4.5V. When the digital multiplexer is charged above 1μA, damage can occur. 3V operating voltages are supported by the electronic component. There are 4 inputs to be operated. Multiplexer ics with 8 outputs are available.
NLAS3699BMN1R2G Features
2 Channels
Switch Circuit: DPDT
2μA Supply Current
-3db Bandwidth: 20MHz
NLAS3699BMN1R2G Applications
There are a lot of ON Semiconductor NLAS3699BMN1R2G Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Automatic test equipment
- Cable PC
- SDH/SONET multiplexers
- Remote wireless modules
- Precision test equipment
- Medical
- Communication systems
- Communication systems
- PBXs
