NLAS3799BLMNR2G
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 400mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS3799B |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 1μA |
| Turn On Delay Time | 50 ns |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 19MHz |
| On-State Resistance (Max) | 400mOhm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 30ns |
| Charge Injection | 51pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAS3799BLMNR2G Overview
This electronic part is conveniently packaged in 16-WFQFN, making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 2:2 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. By its 2 channels, the electronic component provides high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. Circuits based on DPDT switching are used to construct these analog switch ics. The multiplexer consists of 2 circuits. Try searching with NLAS3799B to find analog multiplexer variants. The internal resistance of this digital multiplexer is 400mOhm. To find out what the functions of 16 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 4.5V to a switch device. Analog switch ics with Single supply type are cost-effective. A low voltage of 1.65V should be applied to the electronic component. The switch device would be able to operate with 40μA current. An analogue multiplexer drains from a single voltage supply at 1.65V~4.5V. It can operate from 3V operating voltages. There are 4 inputs to be operated. The analogue multiplexer has 8 outputs.
NLAS3799BLMNR2G Features
2 Channels
Switch Circuit: DPDT
40μA Supply Current
-3db Bandwidth: 19MHz
NLAS3799BLMNR2G Applications
There are a lot of ON Semiconductor NLAS3799BLMNR2G Analog Switches & Multiplexers ICs applications.
- Medical
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Industrial control systems
- DSUs
- Multi-Line E1 Interface Cards
- New designs requiring multiplexer functions
- Private Branch Exchange (PBX)
- MP3 players
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- 65 V DACs
