Parameters |
Lifecycle Status |
LAST SHIPMENTS (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-UFQFN |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
400mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Terminal Position |
QUAD |
Number of Functions |
2 |
Supply Voltage |
3V |
Base Part Number |
NLAS3799B |
Pin Count |
16 |
Number of Outputs |
8 |
Operating Supply Voltage |
3V |
Number of Channels |
2 |
Number of Circuits |
2 |
Max Supply Voltage |
4.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
40μA |
Turn On Delay Time |
50 ns |
Number of Inputs |
4 |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Bandwidth |
19MHz |
Turn-Off Delay Time |
30 ns |
On-State Resistance (Max) |
400mOhm |
Multiplexer/Demultiplexer Circuit |
2:2 |
Off-state Isolation-Nom |
69 dB |
Current - Leakage (IS(off)) (Max) |
500nA |
Channel Capacitance (CS(off), CD(off)) |
3pF |
On-state Resistance Match-Nom |
0.05Ohm |
Switch Circuit |
DPDT |
Switch Time (Ton, Toff) (Max) |
50ns, 30ns |
Charge Injection |
51pC |
Channel-to-Channel Matching (ΔRon) |
50m Ω (Max) |
Crosstalk |
-90dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
1.65V~4.5V |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
NLAS3799BMUR2G Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-UFQFN. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. There is 2:2 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 2 channels. An 3V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 16 series. A DPDT switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. Use NLAS3799B to search for variants of the digital switches. The internal resistance of this digital multiplexer is 400mOhm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 4.5V voltage to the switch device. Analogue multiplexer with a Single supply type that is cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. The switch device would be able to operate with 40μA current. Analogue multiplexers require a 1.65V~4.5V voltage to drain from a single voltage supply. Operating voltages of 3V are compatible with the electrical part. Operating the 4 inputs requires 4 inputs. There are various bandwidths available for data transfer. Multiplexer ics with 8 outputs are available.
NLAS3799BMUR2G Features
2 Channels
Switch Circuit: DPDT
40μA Supply Current
Bandwidth: 19MHz
NLAS3799BMUR2G Applications
There are a lot of ON Semiconductor NLAS3799BMUR2G Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- Avionics and Military Systems
- Access Concentrators
- 65 V DACs
- SONET/SDH ADM
- PBXs
- PDAs
- DVD-R
- Multiplexers
- Power routing