NLAS3799MNR2G
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 400mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS3799 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Turn On Delay Time | 50 ns |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 19MHz |
| On-State Resistance (Max) | 400mOhm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 30ns |
| Charge Injection | 42pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Normal Position | NC |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAS3799MNR2G Overview
This electronic part is conveniently packaged in 16-WFQFN, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:2. Around -40°C~85°C TA is the extended operating temperature. There are 16 terminations totally. As a result of its 2 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. It is part of the design of the 16 series that this electronic component is included. DPDT switching circuits are used in these analog switch ics. 2 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with NLAS3799. There is 400mOhm internal resistance in this digital multiplexer. Datasheets for functions of 16 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. Analogue multiplexer with a Single supply type that is cost-effective. 1.65V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 40μA current. An analogue multiplexer drains from a single voltage supply at 1.65V~3.6V. 3V operating voltages can be used with this electrical part. The electrical component supports 4 inputs. A analog switch ics with 8 outputs is included.
NLAS3799MNR2G Features
2 Channels
Switch Circuit: DPDT
40μA Supply Current
-3db Bandwidth: 19MHz
NLAS3799MNR2G Applications
There are a lot of ON Semiconductor NLAS3799MNR2G Analog Switches & Multiplexers ICs applications.
- HDTV
- Cellular phones
- New designs requiring multiplexer functions
- SONET
- Precision data acquisition
- Medical
- DVD-R
- Signal routing between systems
- Isolation
- Battery-powered systems
