Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-VFQFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
2.5Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Terminal Position |
QUAD |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.5mm |
Base Part Number |
NLAS3899B |
Pin Count |
16 |
Number of Outputs |
8 |
Operating Supply Voltage |
3V |
Number of Channels |
2 |
Number of Circuits |
2 |
Max Supply Voltage |
4.3V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
1μA |
Turn On Delay Time |
30 ns |
Number of Inputs |
4 |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Turn-Off Delay Time |
20 ns |
-3db Bandwidth |
280MHz |
On-State Resistance (Max) |
2.5Ohm |
Multiplexer/Demultiplexer Circuit |
2:2 |
Off-state Isolation-Nom |
67 dB |
Current - Leakage (IS(off)) (Max) |
300nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
0.8Ohm |
Switch Circuit |
DPDT |
Switch Time (Ton, Toff) (Max) |
40ns, 30ns |
Charge Injection |
111pC |
Channel-to-Channel Matching (ΔRon) |
700m Ω |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
1.65V~4.3V |
Height |
950μm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NLAS3899BMNTXG Overview
As the electronic part is packed in 16-VFQFN Exposed Pad, international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 2:2. Operational temperature extended around -40°C~85°C TA. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 2 channels. An 3V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 16 series. The analog switch ics are built using DPDT switching circuits. A 2 circuit is present in this switch device. Using the NLAS3899B search parameter, you can discover variants of the switch. A 2.5Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 4.3V to a switch device. Analogue multiplexers of the Single supply type that are cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. It would be sufficient to run this analogue multiplexer with 1μA current. Using only a single voltage supply, this analog switch requires 1.65V~4.3V voltage. There is a voltage range of 3V operating voltages for the electrical part. In order to operate the 4 inputs, there are several steps to follow. The analog switch ics has 8 outputs.
NLAS3899BMNTXG Features
2 Channels
Switch Circuit: DPDT
1μA Supply Current
-3db Bandwidth: 280MHz
NLAS3899BMNTXG Applications
There are a lot of ON Semiconductor NLAS3899BMNTXG Analog Switches & Multiplexers ICs applications.
- Communication systems
- Digital access cross connects
- PBX interfaces
- SONET/SDH ADM
- Precision instrumentation
- Intelligent PBX
- Industrial control systems
- SONET
- Access Concentrators
- Cable Telephony – NIU, Set-Top Box, Home Side Box