banner_page

NLAS4051DTR2

23ns, 23ns 26Ohm Analog Switches BREAK-BEFORE-MAKE NLAS4051 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NLAS4051DTR2
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 496
  • Description: 23ns, 23ns 26Ohm Analog Switches BREAK-BEFORE-MAKE NLAS4051 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Base Part Number NLAS4051
Pin Count 16
Power Supplies -33/5V
Number of Channels 8
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 2.5V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Operating Supply Current 40μA
Throw Configuration DPST
Propagation Delay 40 ns
Turn On Delay Time 40 ns
Logic Function Demultiplexer, Multiplexer
Voltage - Supply, Single/Dual (±) 2.5V~5V ±3V
Supply Type Dual, Single
Bandwidth 80MHz
Supply Current-Max (Isup) 0.08mA
Neg Supply Voltage-Nom (Vsup) -3V
Turn-Off Delay Time 40 ns
Max Dual Supply Voltage 3.3V
-3db Bandwidth 95MHz
On-State Resistance (Max) 26Ohm
Min Dual Supply Voltage 1.25V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 93 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 10pF 10pF
On-state Resistance Match-Nom 15Ohm
Switch Time (Ton, Toff) (Max) 23ns, 23ns
Charge Injection 12pC
Channel-to-Channel Matching (ΔRon) 10 Ω
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 28ns
Switch-off Time-Max 28ns
Signal Current-Max 0.05A
Length 5mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Lead Free
Lifecycle Status OBSOLETE (Last Updated: 1 day ago)
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -55°C~125°C TA
Packaging Tape & Reel (TR)
Published 2006
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 33Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature ALSO OPERATE WITH 2.5 TO 5.5V SINGLE SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 450mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40

NLAS4051DTR2 Overview


As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -55°C~125°C TA extended. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. There are 1 circuits in this switch device. Try searching with NLAS4051 if you're looking for variants. As far as internal resistance is concerned, it has 33Ohm. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 5.5V in normal situations. The digital multiplexer has a low cost Dual, Single supply. There should be 2.5V voltage fed to the electrical part below 2.5V. The switch device would be able to operate with 40μA current. If put voltage greater than 3.3V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 1.25V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A 80MHz-bandwidth can be used for data transfer. Additional features of the electronic component include: ALSO OPERATE WITH 2.5 TO 5.5V SINGLE SUPPLY.

NLAS4051DTR2 Features


8 Channels
40μA Supply Current
-3db Bandwidth: 95MHz
Bandwidth: 80MHz
Additional Features: ALSO OPERATE WITH 2.5 TO 5.5V SINGLE SUPPLY

NLAS4051DTR2 Applications


There are a lot of ON Semiconductor NLAS4051DTR2 Analog Switches & Multiplexers ICs applications.

  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • DSUs
  • High-Voltage
  • Microprocessor Controlled Analog Systems
  • FTTH
  • Transmit
  • PBXs
  • Fault Tolerant Systems
  • Audio and video switching
  • Relay replacements

Write a review

Note: HTML is not translated!
    Bad           Good