NLAS4051DTR2G

23ns, 23ns 26Ohm Analog Switches BREAK-BEFORE-MAKE NLAS4051 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-NLAS4051DTR2G
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 311
Description: 23ns, 23ns 26Ohm Analog Switches BREAK-BEFORE-MAKE NLAS4051 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	33Ohm
Additional Feature	ALSO OPERATE WITH 2.5 TO 5.5V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	NLAS4051
Pin Count	16
Power Supplies	-33/5V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	2.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Nominal Supply Current	4μA
Power Dissipation	450mW
Throw Configuration	SP8T
Propagation Delay	40 ns
Turn On Delay Time	40 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2.5V~5V ±3V
Halogen Free	Halogen Free
Supply Type	Dual, Single
Bandwidth	80MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	3.3V
-3db Bandwidth	95MHz
On-State Resistance (Max)	26Ohm
Min Dual Supply Voltage	1.25V
High Level Output Current	50mA
Dual Supply Voltage	3V
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	93 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	15Ohm
Switch Time (Ton, Toff) (Max)	23ns, 23ns
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.05A
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

NLAS4051DTR2G Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Increasing operating temperature to around -55°C~125°C TA. In total, there are 16 terminations. The electronic part provides high-quality output because it has 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. The circuits in this analogue multiplexer number 1. Try searching with NLAS4051 if you're looking for variants. Analog switches have 33Ohm internal resistance. The functions of 16 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. A low voltage of 2.5V should be applied to the electronic component. The analogue multiplexer could operate on 40μA current. There is no problem with using dual supply voltage, but it should not exceed 3.3V. The voltage should be at least 1.25V if you are using dual power supplies. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. Operating the 8 inputs requires 8 inputs. A 80MHz-bandwidth can be used for data transfer. Don’t miss additional features of the electronic component such as: ALSO OPERATE WITH 2.5 TO 5.5V SINGLE SUPPLY.