NLAS4051SDTR2G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 33Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NLAS4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Number of Channels | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 40μA |
| Power Dissipation | 450mW |
| Turn On Delay Time | 40 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 1 |
| Voltage - Supply, Single/Dual (±) | 2.5V~5V ±3V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 3.3V |
| -3db Bandwidth | 95MHz |
| On-State Resistance (Max) | 26Ohm |
| Min Dual Supply Voltage | 1.25V |
| Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Length | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NLAS4051SDTR2G Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -55°C~125°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 8 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. It is injected into the electrical part body with 16 pins. Try searching for NLAS4051 variants of the analog switch ic. As far as internal resistance is concerned, it has 33Ohm. Please refer to the datasheets for 16 pins functions. Multiplexers should not be powered above 5.5V in normal situations. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 2.5V should be applied to the electronic component. 40μA current would be enough for this multiplexer to operate. For this switch, a dual supply voltage is feasible, but it must not exceed 3.3VWhen using dual power supplies, you should attach at least 1.25V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. 3V operating voltages can be used with this electrical part. It is possible to operate 1 inputs.
NLAS4051SDTR2G Features
8 Channels
40μA Supply Current
-3db Bandwidth: 95MHz
NLAS4051SDTR2G Applications
There are a lot of ON Semiconductor NLAS4051SDTR2G Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Power routing
- Remote wireless modules
- Multiplexers
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Ultrasound
- Video switching
- Data Acquisition Systems
- Industrial control systems
- New designs requiring multiplexer functions
