NLAS4052DR2
| Parameters | |
|---|---|
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.08mA |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| -3db Bandwidth | 140MHz |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 23ns, 23ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Drain to Source Resistance | 86mOhm |
| Signal Current-Max | 0.05A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 33Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | unknown |
| Base Part Number | NLAS4052 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | -3.3/GND3.3/5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 40μA |
| Throw Configuration | 4PST |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.5V~5V ±3V |
NLAS4052DR2 Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. There are 16 pins injected into the electronic part body. Unlike digital switches, these are based on SP4T switching circuits. The multiplexer consists of 2 circuits. Using the NLAS4052 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 33Ohm. Datasheets for functions of 16 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. Analog switch ics with Dual, Single supply type are cost-effective. The analogue multiplexer could operate on 40μA current. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. The Drain to Source resistance of this electronic component is 86mOhm.
NLAS4052DR2 Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
-3db Bandwidth: 140MHz
Drain-to-Source resistance: 86mOhm
NLAS4052DR2 Applications
There are a lot of ON Semiconductor NLAS4052DR2 Analog Switches & Multiplexers ICs applications.
- Industrial
- SONET
- Video switching
- Battery Powered Instruments
- Cross Connects
- Medical
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- PDH Multiplexers
- Imaging
- SONET/SDH ADM
